Beschreibung | Ethernet/IP-Anschluss |
---|---|
Kontakt | M12 bis M12 |
Ausrüstung | 8 Pins |
Farbe des Drahtes | 1 = WH/OR 2 = OR 3 = WH/GN 4 = GN 5 = WH/BN 6 = BN 7 = WH/BU 8 = BU |
Wellenmessgerät | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
Spannung | 60 V |
---|---|
Umgebungstemperatur | -25~+85℃ |
Dichtungsmaterial | FPM/FKM |
PIN-Nummer | 4 |
Farbe des Drahtes | 1 = WH/OR(+tx) 2 = WH/GN(+rx) 3 = OR(-tx) 4 = GN(-rx) |
Name | Ethernet/IP-Anschluss |
---|---|
Kontakt | M12 bis M12 |
PIN-Nummer | 8 Pins |
Farbe des Drahtes | 1 = WH/OR 2 = OR 3 = WH/GN 4 = GN 5 = WH/BN 6 = BN 7 = WH/BU 8 = BU |
Schaltfläche | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
Spannung | 60 V |
---|---|
Dichtungsmaterial | FPM/FKM |
Kabellänge | 2 Meter |
Kabelausgang | Gerade. |
Farbe des Drahtes | 1 = WH/OR(+tx) 2 = WH/GN(+rx) 3 = OR(-tx) 4 = GN(-rx) |
Kabel | 2 Meter |
---|---|
Code | A-Codierung |
Spannung | 30 V |
Nennstrom | 1.5A |
Standards | IEC 61076-2-101 |
Standards | IEC 61076-2-101 |
---|---|
Verschmutzungsgrad | 3 |
Kontaktträgermaterial | PA, schwarz |
Kabellänge | 2 Meter |
Schaltfläche | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
Produktbezeichnung | M12 Verbindungen mit geformtem Kabel |
---|---|
Dichtungsmaterial | FPM/FKM |
IP-Rate | IP67 |
Widerstand gegen Isolierung | ≥ 100MΩ |
Kontaktwiderstand | ≤ 5mΩ |
Beschreibung | M12-Anschluss mit vormontiertem Kabel |
---|---|
Schaltfläche | 8 × 0,25 (8 × 24 AWG) PVC, schwarz |
Kontaktträgermaterial | PA, schwarz |
Standards | IEC 61076-2-101 |
Dichtungsmaterial | FPM/FKM |
Kabel | Kategorie 6A 26AWG |
---|---|
Coding | X-Code |
Ausrüstung | 8 |
Strom | 0.5A |
Wellenmessgerät | 4 mal 2 mal 0.14 |
Produktbezeichnung | Stecker RJ45 |
---|---|
Beschreibung | Kategorie 6A Feldstecker STP-Tollless-Typ |
Körper | Zinklegierungen, mit Nickelplattierung |
Kontakthalter | PC,94V-2 |
PCB-Material | UL 94V-0 |