| Dichtungsmaterial | FPM/FKM |
|---|---|
| Kabellänge | 2 m |
| Farbe des Drahtes | 1 = WH/OR 2 = OR 3 = WH/GN 4 = GN 5 = WH/BN 6 = BN 7 = WH/BU 8 = BU |
| Widerstand gegen Isolierung | ≥ 100 MΩ |
| Schaltfläche | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
| Beschreibung | Ethernet/IP-Anschluss |
|---|---|
| Kontakt | M12 bis M12 |
| Ausrüstung | 8 Pins |
| Farbe des Drahtes | 1 = WH/OR 2 = OR 3 = WH/GN 4 = GN 5 = WH/BN 6 = BN 7 = WH/BU 8 = BU |
| Wellenmessgerät | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
| Spannung | 60 V |
|---|---|
| Umgebungstemperatur | -25~+85℃ |
| Dichtungsmaterial | FPM/FKM |
| PIN-Nummer | 4 |
| Farbe des Drahtes | 1 = WH/OR(+tx) 2 = WH/GN(+rx) 3 = OR(-tx) 4 = GN(-rx) |
| Name | Ethernet/IP-Anschluss |
|---|---|
| Kontakt | M12 bis M12 |
| PIN-Nummer | 8 Pins |
| Farbe des Drahtes | 1 = WH/OR 2 = OR 3 = WH/GN 4 = GN 5 = WH/BN 6 = BN 7 = WH/BU 8 = BU |
| Schaltfläche | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
| Spannung | 60 V |
|---|---|
| Dichtungsmaterial | FPM/FKM |
| Kabellänge | 2 Meter |
| Kabelausgang | Gerade. |
| Farbe des Drahtes | 1 = WH/OR(+tx) 2 = WH/GN(+rx) 3 = OR(-tx) 4 = GN(-rx) |
| Kabel | 2 Meter |
|---|---|
| Code | A-Codierung |
| Spannung | 30 V |
| Nennstrom | 1.5A |
| Standards | IEC 61076-2-101 |
| Standards | IEC 61076-2-101 |
|---|---|
| Verschmutzungsgrad | 3 |
| Kontaktträgermaterial | PA, schwarz |
| Kabellänge | 2 Meter |
| Schaltfläche | 4 mal 2 mal 0.25, abgeschirmt (4×2×24AWG) |
| Produktbezeichnung | M12 Verbindungen mit geformtem Kabel |
|---|---|
| Dichtungsmaterial | FPM/FKM |
| IP-Rate | IP67 |
| Widerstand gegen Isolierung | ≥ 100MΩ |
| Kontaktwiderstand | ≤ 5mΩ |
| Beschreibung | M12-Anschluss mit vormontiertem Kabel |
|---|---|
| Schaltfläche | 8 × 0,25 (8 × 24 AWG) PVC, schwarz |
| Kontaktträgermaterial | PA, schwarz |
| Standards | IEC 61076-2-101 |
| Dichtungsmaterial | FPM/FKM |
| Kabel | Kategorie 6A 26AWG |
|---|---|
| Coding | X-Code |
| Ausrüstung | 8 |
| Strom | 0.5A |
| Wellenmessgerät | 4 mal 2 mal 0.14 |