| Decription | Inductive Sensors |
|---|---|
| Sensing Range | 3mm |
| Connection Method | 2 Meter Cable |
| Shell | Stainless Steel |
| Allowable Ripple Voltage | <10% |
| Temperature Drift | <15 % |
|---|---|
| Housing Material | PVDF |
| Flush Mounting | No |
| Output Current Max. Le | Max.250mA |
| Active Surface | PVDF |
| Flush Mounting | No |
|---|---|
| Degree Of Protection | (IEC 529) IP 67 |
| Repeat Accuracy | <5 % |
| Temperature Drift | <15 % |
| No Load Current Lo | Tip. 15mA |
| Installation Type | Quasi-flush |
|---|---|
| Snesing Range | 4mm |
| Assured Sensing Range(Sa) | 0…3.2mm |
| Standard Target | Fe 12*12*1t |
| Cylindrical Size | M12*1*63mm |
| Installation Type | Non-flush |
|---|---|
| Connection Type | M12 Connector |
| Housing Material | Brass,nickel-plated |
| Max Load Current | 200mA |
| Ambient Temperature | -25°C ~+70°C |
| Installation Type | Quasi-flush |
|---|---|
| Detection Distance | 2mm |
| Output Function | PNP,NC |
| Supply Voltage | 10-30VDC |
| Connection Type | M12 Connector |
| Installation Type | Quasi-flush |
|---|---|
| Detection Distance | 2mm |
| Output Function | NPN NC |
| Leakage Current | <0.8mA |
| Max.Load Current | 200mA |
| Installation Type | Quasi-flush |
|---|---|
| Output | NPN NC |
| Connection Type | M8 Connector |
| Max. Load Current | 100mA |
| No Load Current | <10mA(24V) |
| Active Surface | PVDF |
|---|---|
| Electrical Version | 3 Wires DC |
| Output Current Max. Le | Max.250mA |
| Led Display | Yellow |
| Operating Distance Sn | 8 Mm |
| Contact Surface Material | Brass, Gold-plated |
|---|---|
| Housing Material | PBT/PA, Black |
| Seal Material | FPM/FKM |
| Insulation Resistance | ≥ 100MΩ |
| Contact Resistance | ≤ 5mΩ |